Arduino Fans

Description

Arduino Pro Mini ATMega328P-AU 5V 16 Mhz ATMega 328P AU Pro Mini Arduino Compatible Development Board

• 100% New High Quality Pro Mini ATMega328P-AU Board
• Using Original Atmel ATMega328P-AU Microcontroller 5V 16Mhz
• 14 Digital input/output ports RX and TX, D2 ~ D13
• 8 Analog input ports A0 ~ A7
• 6PWM ports, D3, D5, D6, D9, D10, D11
• Support external 3.3 V ~ 12 V DC power supply
• Support 9 v batteries
• Max 150mA output
• Weight less than 2 grams!
• Size: 3.3cm x 1.6cm (33mm x 16mm)

Professional version of the Arduino Mini Pro is a micro controller circuit board. It has 14 digital input/output pin (six of them can be used as a PWM output), 8 analog input, a 16 MHZ resonator, a reset button, the installation hole lead foot.

Description:It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 5V Arduino running the 16MHz bootloader. Arduino Pro Mini does not come with connectors populated so that you can solder in any connector or wire with any orientation you need. We recommend first time Arduino users start with the Uno R3. It’s a great board that will get you up and running quickly. The Arduino Pro series is meant for users that understand the limitations of system voltage (5V), lack of connectors, and USB off board.

We really wanted to minimize the cost of an Arduino. In order to accomplish this we used all SMD components, made it two layer, etc. This board connects directly to the FTDI Basic Breakout board and supports auto-reset. The Arduino Pro Mini also works with the FTDI cable but the FTDI cable does not bring out the DTR pin so the auto-reset feature will not work. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin and not VCC.