Arduino Fans

Description

USB to UART CP2102 USB 2.0 to TTL UART Serial Converter Module STC Replace FT232 Adapter Module 3.3V/5V Power

• 100% New and High Quality USB to TTL Converter Module
• Built-in USB to TTL Transfer chip CP2102 Replace FT232
• Designed to be used for USB to TTL Electronic Projects.
• TTL interface output, easy to connect to your MCU.
• Dual 3.3V and 5V Power Output, Work with 3.3v and 5v Target Device
• DTR pin used to programmatically reset target microcontroller

CP2102 USB 2.0 to TTL UART Serial Converter is high integration, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM, and asynchronous serial data bus (UART), supports full-featured modem signals, without any external USB device. CP2102 with other USB-UART adapter circuit works similar to the PC through the driver’s USB port into a virtual COM port in order to achieve the purpose of expansion.

with self-recovery fuse. In the event of accidental short circuit, it can effectively protect your computer USB port and Downloader with three LEDs: power indicator, data reception indicator, the data transmission indicator, working status, with 3.3V and 5V dual power output.

Supported operating systems:

• Windows XP / 7 / 8 / 8.1 / 10
• MAC OS-9 OSX
• Linux 2.40 or later

Features

• Included USB transceiver, without external circuit device
• Includes a clock circuit, no external circuitry is
• Includes power-on reset circuit
• Chip 3.3V voltage regulator output voltage can be
• Meet the USB2.0 specification requirements
• SUSPEND pin supports USB suspend state
• Asynchronous serial data bus compatible with all handshake and modulation controller interface signals
• Supported data format is 8 data bits, 1 stop bit and parity bits
• Connotation 512 byte receive buffer and 512 byte transmit buffer
• Supports hardware handshaking or X-ON/X-OFF