Arduino Fans

Description

High Quality Dual-axis XY Joystick Module PS2 Joystick Control Lever Sensor for Arduino NodeMCU ARM AVR Microcontrollers KY-023

• Dual axis X-Y joystick module for Arduino, ARM AVR, NodeMCU
• 2 high quality long service life potentometers for 2 axis
• 1 high quality push down switch
• Input voltage range: DC 3.3V to 5V
• Two-way analog output and a digital output interface
• Size:4CM X 2.6CM X 3.2CM

1. Input voltage range: DC 3.3V to 5V

2. Output signal: the module has two-way analog output and a digital output interface, the output value corresponding to (X, Y) bi-axial offset, the type of analog; keys that the user press, the Z axis is a push switch read as digital input.

3. Arduino controller can be programmed, the sensor expansion board plug, complete with creative remote interactive works.

4. Cross joystick is a bi-directional 10K resistor, with the rocker in different directions, the resistance should be changed by moving the lever. This module uses 5V power supply, the original state of X, Y read voltage of 2.5V or so, when pressed with the arrow direction, the read voltage value increases with the maximum to 5V, voltage decreases while move lever in opposite direction, The minimum is 0V.

You have to use 2 analog inputs of MCU to read (X Y) the analog output of this module, the switch is a button which you may use with a digital input pin of your Micro Controller eg. Arduino, Raspberry Pi, Orange Pi, NodeMCU, ESP32, ARM AVR development boards.