Arduino Fans

Description

4 Buttons 433MHz Universal 4 CH RF Wireless Remote Control Transmitter Receiver Set

• 100% New and High Quality RF Wireless Remote Control Set
• 433MHz 4 Buttons RF Remote Control Transmitter with Battery
• 433MHz 4 Channels Wireless Receiver Module
• EV1527 Learning code Remote Control Receiver + Transmitter
• Complete Set 1x Remote Receiver + 1x Remote Controller
• Note: The installation and usage of these modules require some basic knowledge of electronics, if you do not know how to install, please don’t buy it.

Remote Control Transmitter

100% brand new, high quality.
Size: 58.7*30*13.5 (mm)
Working frequency: 433MHZ
Remote control distance: 50-100m (in an open environment)
Working mode: fixed welding code type, learning type, copy type optional Working voltage: DC 12V
Working current: 11mA
Working environment: -15*75 degrees Celsius
Application: Suitable for electric door remote control, telescopic door remote control, garage door remote control, motor control remote control, curtain control remote control, car motorcycle remote control, etc.

Receiver Module RX480-E4

Working Voltage : DC3.3~5V
Quiescent Current : Less than 5mA
​Output current: 10 mA
Working Frequency: 433MHz ( Others can be customized )
Receive Sensitivity: -108dB
Receive Distance:15 meters above
Frequency band: ±0.2MHz
Working Temperature : -25~75

How To Programming:​

1. Delete existing data:Press learning button 8 times. Response: LED flashes 7 times.

2. Learning remote code:press learning key once, twice or three times (see below).

LED turns on:learning mode is active. Press any button of the remote control.

LED indicator flashes three times:learning successfully completed.

3. Test:after the above operation , the receiver board can be controlled by the remote control .

More transmitters with different IDs can be learned and stored additionally, starting with step 2.

A mixture of different modes is possible.

Button usage (sets mode and starts pairing process):

Press once:Inching mode (Momentary Mode)

Press twice:self-Lock Mode (Toggle-Mode of the 4 Channels)

Press three times:interlocked mode (selected channel active and be cleared, if another channel becomes active)

Receiver Module Connection Diagram