Arduino Fans

Description

4 Buttons 433MHz Wireless Remote Control Transmitter Receiver Universal 4CH RF Transmitter Receiver Garage Door Auto Copy Remote With Keychain

• 100% New and High Quality Wireless Promote Control Set
• 433MHz 4 Buttons Metal Body Remote Control Transmitter with Battery
• 433MHz 4 Channels Wireless Receiver Module
• Complete Set 1x Remote Receiver + 1x Remote Controller
• Note: The installation and usage of these modules require some basic knowledge of electronics, if you don’t know how to install, please don’t buy it.

Remote Control Transmitter

• 100% brand new, high quality.
• Size: 58.7mm x 30mm x 13.5mm
• Color: silver + black
• Working frequency: 433MHZ
• Remote control distance: 50-100m (in an open environment)
• Installation method: copy
• Working mode: fixed welding code type, learning type, copy type optional Working voltage: DC6V
• Working current: 11mA
• Working environment: -15-75 degrees Celsius
• Application: Suitable for electric door remote control, telescopic door remote control, garage door remote control, motor control remote control, curtain control remote control, car motorcycle remote control, etc.

Receiver Module RX480-E4

• Working Voltage : DC3.3~5V
• Quiescent Current : Less than 5mA
• ​Output current: 10mA
• Working Frequency: 433MHz ( Others can be customized )
• Receive Sensitivity: -108dB
• Receive Distance: 15 meters above
• Frequency band: ±0.2MHz
• Working Temperature : -25~75

How To Programming:​

1. Delete existing data:Press learning button 8 times. Response: LED flashes 7 times.

2. Learning remote code:press learning key once, twice or three times (see below).

LED turns on: learning mode is active. Press any button of the remote control.

LED indicator flashes three times: learning successfully completed.

3. Test:after the above operation , the receiver board can be controlled by the remote control .

More transmitters with different IDs can be learned and stored additionally, starting with step 2.

A mixture of different modes is possible.

Button usage (sets mode and starts pairing process):

Press once: Inching mode (Momentary Mode)

Press twice: self-Lock Mode (Toggle-Mode of the 4 Channels)

Press three times: interlocked mode (selected channel active and be cleared, if another channel becomes active)

Receiver Module Connection Diagram